FIX-A-LEAK leak repair

INSTRUCTIONS FOR RETURN PIPES OR LEAKS IN THE GROUND

1. Divert the MEDIA FILTER before adding FIX-A-LEAK. Sand filters: Set the valve to recirculate. Cartridge filters: Remove all cartridges. Remove the elements and circulate the system through the empty tank.
2. With the pump running, add FIX-A-LEAK through the skimmer. After adding FIX-A-LEAK, adjust the suction to the main drain.
3. Run the circulation pump for 8 to 10 hours per day. Check the water level for the next 1 to 2 days to determine if the leak has stopped.
4. If the seal is successful, wait 48 hours with the pump off to ensure the level remains stable.

You can now resume filtration and remove the product from the filter if necessary. Note: This procedure can take 3 to 4 days from start to finish. As this is a repair, swimming should not take place until the FIX-A-LEAK product is completely removed.

Caution: Causes skin irritation. Causes serious eye irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wear protective gloves and eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.